组成图示
示意图生成中
传感器类型
—
检测对象
—
检测原理
—
检测灵敏度
—
效应效果
—
传感器的构成
—
中文摘要
—
英文摘要
This study is focused on the utilization of waste microalgal sludge (MS) from microalgal extraction and its potential as an electrode material. The MS was activated under N2 at high temperature for conversion to biochar (MSB). In addition, cobalt (Co; metal hydroxide) and chitosan were used as a mediator for electron transfer by immobilization on MSB (MSB/Co/chitosan). Through analysis of the surface and components of the MSB/Co/chitosan, it was shown that Co and chitosan were properly synthesized with MSB. The enzymatic fuel cell (EFC) system successfully obtained a power density of 3.1 mW cm-2 and a current density of 9.7 mA cm-2. In addition, the glucose biosensors applied with the developed electron transfer mediator showed a sensitivity of 0.488 mA mM-1 cm-2.