Ultrasensitive and Low-Cost Paper-Based Graphene Oxide Nanobiosensor for Monitoring Water-Borne Bacterial Contamination.

Water-borne pathogens are mostly generated due to poor sanitation, industrial effluents, and sewage sludge, leading to a significant increase in mortality rate. To prevent this, we need a simple, user-friendly, and rapid on-site detection tool of pathogens, i.e., a biosensor. As contaminated water mainly contains (80%) coliform bacteria, of which Escherichia coli is the major species, we have developed a screen-printed paper-based, label-free biosensor for the detection of E. coli in water. A nanoarchitectured graphene oxide (GO), as a fast electron-transfer flatland, was deposited on the screen-printed graphene (G) on a hydrophobic paper, followed by the immobilization of lectin Concanavalin A (ConA) as a biorecognition element for a GGO_ConA-biosensing electrode. The electrochemical characterization of GGO_ConA shows fast electron transfer with a calculated electroactive surface area of 0.16 cm2. The biosensor performance was tested in the sludge water and beach water (real sample) as an analyte using the electrochemical impedance spectroscopy (EIS) technique. The charge-transfer resistance (Rct) of GGO_ConA increases linearly with the bacterial concentration in the range of 10-108 CFU mL-1 with an estimated limit of detection (LOD) of 10 CFU mL-1, which indicates the ultrasensitivity of our biosensor, with 100 times more sensitivity than previous studies. Our reported biosensor, being cost-effective, eco-friendly, and ultrasensitive, may serve greatly as a portable monitoring kit for checking water-borne bacterial contamination.