组成图示
示意图生成中
传感器类型
—
检测对象
—
检测原理
—
检测灵敏度
—
效应效果
—
传感器的构成
—
中文摘要
—
英文摘要
Use of a highly sensitive, selective capacitive biosensor is reported for label-free, real-time, easy and rapid detection of trypsin by using the microcontact imprinting method. Real-time trypsin detection was performed with trypsin-imprinted (trypsin-MIP) capacitive electrodes using standard trypsin solutions in the concentration range of 1.0×10(-13)-1.0×10(-7)M with a detection limit of 3.0×10(-13)M. Selectivity and cross-reactivity of the system were tested by using competing proteins including chymotrypsin (chy), bovine serum albumin (BSA), lysozyme (lyz) and cytochrome c (cyt c) in singular and competitive manner and the selectivity of the system was determined with the selectivity coefficients of approximately 705.1, 6.5, 6.4 and 5.1 for chy, BSA, lyz and cyt c, respectively. The trypsin-MIP capacitive electrode was used for ~80 assays during 2 months and retained its binding property during all that time with a decrease of approximately 2.3% in the signal amplitude. In the last step, trypsin activity was measured by using Nα-Benzoyl-D, l-arginine 4-nitroanilide hydrochloride (BAPNA) as the substrate with spectrophotometer at 410nm. The trypsin activity was measured as 9mU/mL by spectrophotometer while the amount of captured enzyme calculated from the capacitive system was 7.9mU/mL which shows the correlation between two methods. From the comparison it is obvious that the new method is an attractive alternative for assaying trypsin and the developed capacitive system might be used successfully to monitor label-free, real-time enzymatic activity of different proteases in a sensitive, rapid, cost-effective manner for different applications.